If you have an older Intellijel module and would like to update it to have the latest faceplate panel, you can purchase new faceplates through our online store. Alternatively, you can request your local retailer to order in a new faceplate for you.
Once you receive the faceplate, you will have to remove the jack nuts to take off the old panel, then tighten them on top of the new panel. It should be possible to do this with your fingers, but it will be much easier if you have a 6mm knurled nut driver.
Faceplate panels are available on our web shop here: https://intellijel.com/product/replacement-panel/